HomeMy WebLinkAboutCOMA2012-004200"Live well dress well" sign mounted @ 11' 6" on
built out feature wall.
"Fit right in" sign
mounted 11'6" h on
built out feature
wall.
"walk this way" mounted 11'6" h
on built out feature wall.
"meet your sole
mate" Mounted
11'6"h on built out
feature wall.
Hanging shoe
graphic- mounted
from ceiling 8'
above ground.to
bottom of sign by
cable.
RECEIVED - TENANT COORDINATION
By KnauerK at 10:51:33 AM, 3/1/2016
Landlord's Signage Comments:
•Landlord and Tenant responsibilities are as defined in the
Lease.
•All modifications to the Landlord approved drawings shall be
resubmitted to the Landlord for re-approval. All construction
completed without Landlord approval shall be corrected as
approved by Landlord at Tenant sole expense.
•Tenant shall be responsible for all permits.
•Plans reviewed and approved by Landlord shall be present
on the job site and be accompanied by plans approved for
permit. All proposed deviation from the Landlord approved
plans shall be numbered and clouded on the plans, and then
resubmitted by the Tenant to the Landlord for re-approval
prior to any fabrication and / or construction changes taking
place in the field.
•Approval of Tenant’s signage documents by the Landlord
does not release the Tenant and or Tenant’s contractors from
complying with the lease agreement and all authorities having
jurisdiction (AHJ) including but not limited to local, state,
national, and mall criteria, acts, codes, and other
requirements.
•All Landlord comments on this set of drawings shall apply to
the entire document set, even if not repeated on every sheet.
•Tenant’s signage contractor is responsible to comply with all
Mall Rules and Regulations and as instructed on site by Mall
Operations Team.
•Tenant’s signage contractor is required to check in with
Landlord’s Mall Operations Team prior to the start of Tenant
construction.
•All damage and / or downtime to Landlord’s property or other
tenant’s property during construction (i.e. mall flooring,
bulkhead, neutral piers, etc.) shall be repaired to “like-new”
condition and reimbursed at Tenant’s sole expense.
•All Landlord equipment, component, and / or services
feeding other tenant(s) that are existing in the space shall
remain visible and accessible to the Landlord. Tenant shall
install access panels as required to maintain access and shall
be labeled to properly identify systems. Tenant shall
coordinate location with Mall Operations Team.
•The sign and its system of components and devices shall be
UL approved and labeled, separately grounded, and in
compliance with NEC, UL, and authorities having jurisdiction
(AHJ) including but not limited to local , state, national, and
mall criteria, acts, codes, and other requirements.
•All signage transformers shall be exterior grade and
concealed within the signage or located remotely concealed
from view. Transformer noise shall NOT be audible from
within the center.
•LED lamping is preferred for all signage illumination and
maybe required by Landlord’s Design Criteria and / or
authorities having jurisdiction (AHJ); neon tubing is strictly
prohibited. Auxiliary signage, posters, and / or advertising
banners are prohibited in “Design Control Zone”, including but
not limited to hours of operation, open signs, advertising, and
DBA signs.
•All illuminated storefront entry lights, show window lights, and
show window receptacles shall be separately circuited and
controlled by a time switch allowing 7-day / 24-hour
programming. System shall be programmed for illumination
during mall business hours and shall be coordinated with the
Mall Operations Team.
•The sign and its system of components shall be securely
fastened and concealed behind tenant’s storefront or building
façade.
Interior Sigange Applications:
•Box or Cabinet signs will only be approved for interior
application if they are recessed and flush with the storefront.
•Interior storefront signage shall be separately circuited and
controlled by a time switch allowing 7-day / 24-hour
programming.
Exterior Signage Applications:
•Prior to installation of exterior signage, the sign installer shall
be required to place a template on the storefront indicating
the sign placement & light location(s), where applicable, and
approved by Mall Operations Team prior to installation.
•Exterior signage shall be manufactured from exterior grade
materials, having semi-glass or matte finish, and be
waterproof. All attachment systems shall be concealed
stainless steel and all building penetrations shall be sealed
with exterior grade systems.
•The sign and its system of components shall be securely
fastened and concealed behind tenant’s storefront or building
façade.
•All exterior illuminated storefront signage shall be separately
circuited and controlled by a photocell.
•All related roof work, including parapet walls, shall be done
by Landlord’s required roofing contractor, at Tenant’s sole
expense. Coordinate all work with Mall Operations Team.
Tenant Name:
Property Name:
Corp #:Space #:
225 West Washington Street
Indianapolis, IN 46204
SimonTCTenantPlans@simon.com
Landlord review is for design intent and compliance with mall criteria ONLY. The Tenant,
Tenant’s Architect, and Tenant’s General Contractor’s responsibility for project compliance with
all local, state, and federal codes, act, regulations, permits, inspections, and reviews.
Reviewer:Date:
philadelphia
5211
saks off fifth
624
Approved As Noted (AAN)
gavanj 3/2/2016
Additional Comments:
Return Drawings To:
George Aaron <gaaron@PhiladelphiaSign.com>
Pull all necessary
permits as required