HomeMy WebLinkAboutDENSITY TESTING -F241078-1489978Respectfully Submitted,
Standard Count:(D): 2867 (M):
UES / Riner Engineering
approval. Test results and reports apply only to the samples tested and/or observed, and are not indicative of the qualities of apparently identical or similar specimens. Technician time is from portal to portal. MF-010(8/2/2016)
Environmental Consulting & Permit Support | Geotechnical Engineering | Materials Testing & Special Inspections | Geophysical Technologies
This report is in general compliance with one or more of the following technical standards: D6938-15
Our test results and reports are for the exclusive use of the Client (and designated recipients) and shall not be reproduced and/or distributed except with express approval of UES. The use of our name and test results must receive our written
Ronnie Yeoman
Project Manager
6
11 E/1 FG-1.0 1 6
Gauge Information Non-compliant results are indicated by an asterisk(*) if
applicable.
Serial No:9941 Manufacturer:Humboldt Model:5001EZ
117.0
117.2 92.7 25.7
General Location
Area:Leaveouts
409
Remarks:
Field Test Data
Test
No.Test Location Lift/
Depth
Mat.
No.
Probe
Depth
(in.)
Wet
Density
(pcf)
Dry
Density
(pcf)
Percent
Moisture
(%)
Percent
Compaction
(%)
95
95
1 A/1 FG-2.0 1
96121.4 98.0 438Dark brown clay with sand 921
Project Specifications
Mat.
No.
Optimum
Moisture
(%)
Max Dry
Weight
(pcf)
Proctor
Report No.
Moisture
Min. (%) Max.
Compaction
Min. (%) Max.Material Description/Classification PI
Material Information Laboratory Data
787 Seventh Avenue, 50th Floor Report Date:11/6/2024
Grapevine, Texas Page Number:1 of
Project:121 Commerce Center Addition (Lot 1)Project Number:F241078
Off Genesis Way and Enchanted Way Technician:Mitchell, Ebony
New York, NY 10019 Weather:Clear
Work Order Number:
5058 Brush Creek Rd
Fort Worth, TX 76119
www.TeamUES.com
TBPELS Firm No. 813
In-Place Nuclear Density
Test Report
Client:GTIS Acquisitions, LLC Service Date:11/5/2024
1489978
1
96
92.5 26.0 94
92.9 25.9
95
26.4
6
9 C/1 FG-1.0 1 6
6 F/1 FG-2.0 1 6
7 A/1 FG-1.0 1 6
8 B/1 FG-1.0 1 6
6
117.9 92.8 25.7
91.9
12 F/1 FG-1.0 1
10 D/1 FG-1.0 1 6
4 D/1 FG-2.0 1 6
5 E/1 FG-2.0 1
2 B/1 FG-2.0 1 6
3 C/1 FG-2.0 1 6
117.4
118.2
117.2 92.9 25.4
93.4 25.7
95117.9 92.9 25.9
95
116.8
117.4 92.2 26.3
92.2
94
94
26.2 94116.8
95
92.5 26.8 94117.3
118.3 93.8 25.4