HomeMy WebLinkAbout74623_10158_041025-24-DM9103-040-CompressiveStr-HK24-DM9103Project #:
Z Constructors
2051 State Hwy 121, Grapevine, Texas 76051
Proposed Stuarts Paint and Body Shop" 2051 State Hwy 121, Grapevine, TX 76051
Location:
Project:
Client:Report Date:04/10/2025
DESIGN, FIELD & LAB DATA
Location:
Air Temp (F):N/A
Mixed on site Truck No:Ticket No:Mixed on site
Capping Method:
No. of Specimens:3 / 4x8
Time Sampled:9:00 AM
Time Batched:8:30 AM
Sunny
Forming Method:Load Qty:Slump (In):000
North wall 36 rows height wide 78 rows
Weather:
Min Temp:
Specimen Age at Time of Transport to Lab:
Grout Temp:0
Mixed on site Supplier:
Curing History:Max Temp:
Sampled:North wall 36 rows height wide 78 rows
Date Placed:
Admixtures:
Design Strength:
Design Slump (Inches):
3000 psi @ 28 days
Break Days:7,28,28
Mix No/Design:0000
0000
Contractor:
Mix Type/Procedure:
04/10/2025 0000Load #:
Prism ID
Test Age
(Hours /
Days)
Date of Test Total Load
(lbs)
Prism Dimensions Width (in)Avg.
Width
(in)
Prism Dimensions Height (in)Avg.
Height
(in)
Avg. Cross
Section
Area
Test
Strength
(psi)
8|<1/8"?4P<1/8"?Tested by Type of
BreakW1W2W3W4H1H2H3H4
0410-24-DM9103-G-A-A 7 days 04/17/2025 26,440 4 4 4 4 4.00 8 8 8 8 8.00 16 1650 HT
0410-24-DM9103-G-A-B 28 days 05/08/2025 0.00 0.00
0410-24-DM9103-G-A-C 28 days 05/08/2025 0.00 0.00
0.00 0.00
LAB RESULTS Set No:Lab ID:1692Date Received:04/11/2025 1692
Are Prisms made by Contractor?Are Prisms picked up by Contractor?RESULTS COMPLY RESULTS DO NOT COMPLY
Note: Test Methods ASTM C1019 (excluding 5.2, 11.4, 11.5), C39, C511, C143, C617, C1064. Deviations from Test Method: Specimens were cast in corrugated cardboard prism mold (Grout Sample Box) without
comparative test results with molds described in 5.1. Min/Max temperature at curing not performed unless noted above.
Results Spec: 3000 psi @ 28 days
Chris, Mommi Carter, Tyler George
Report Copied to:
Field Representative: Hyder Khan
Cert No:
Lab Representative: Hayder Toman
8|<1/8"? - 8 perpendicularity measurements less than 1/8"?
4P<1/8"? - 4 out of plane measurements less than 1/8"?
GeoScience Engineers, LLC
CMT Admin
Date Signed: 04/23/2025 01:54 PM
Notes: The results above apply only to the specific samples noted using the aforementioned test method(s) and do not represent any other sample. Reports may not be reproduced except in full without permission.
Compressive Strength - Grout Specimens (ASTM C39)
040Report #:
Page 1 of 1
GeoScience Engineers, LLC, 2712 Satsuma Drive, Suite 400 | Dallas | TX 75229 | Phone: 972-488-3500 | Email: info@geoscienceinc.com
www.geoscienceinc.com