HomeMy WebLinkAboutFargo Consultants, Inc. - 6/5/2017F?60
_w
FARGO CONSULTANTS, INC.
DAILY FIELD REPORT
Client: JLB Partners, LP
Project Name: Grapevine Bluffs
Project Location: Grapevine, Texas
Service(s) Provided:
Fire Proofing Thickness Determination
Service(s) Performed By: BKH Inspection Services
2324 Fabens Rd. • DaRas, Texas 75229
Tel 214-3524100 Fax 214352-4811
Date Performed: 6/5/2017
FARGO Job No: M16-4962
Respectfully Submitted,
Fargo Consultants, Inc.
The information and results shown on this report are for the exclusive use of the client and the client's designated recipients on file in our office. Test results are based on
data obtained from specific samples tested at particular locations noted and are not indicative of the qualities of apparently identical or similar specimens, composition,
performance, etc. The use of our name and test results must receive our written approval. Reports must be reproduced in their entirety.
Geotechnical Engineering • Construction Materials Testing • Environmental Services
www.dallasfargo.com
BKH INSPECTION SERVICES., -LLC
P.O Box 2472 Burleson, TX 76097
817-726-5456
bkhinspection(rD,Qmail.com
www.bkhinspectionservices.com
REPORT OF
ULTRASONIC INSPECTION
Client: Fargo Consultants, Inc.
Project: Grapevine Bluffs
Report No.:
Project No.:
Date of Service:
Purchase Order No.:
UT13048
M16-4962
06-05-2017
3505
Services: Coating Thickness Reading/Observation Page I of 1
s=.. u r,
71.
Instrument/SN:
Certification Date:
Purpose of Test:
Specification:
Scan Sensitivity:
Positector 6000-FKS3K87022
05-16-2016
Intumescent Coating Thickness
Contract Documents
Magnetic Induction
Long. Freq. /Size:
Shear Freq. /Size:
Calibration:
Couplant:
FKS 1275655
N/A
Defelsko Precision Standards.
N/A
Discrepancies/Comments: BKH Inspection Services arrived at the above location to perform a ultrasonic inspection with the results
listed below:
Item Quantity Description Results
1
Building Type V1 -S 2" floor level structural steel Intumescent Coating
Thickness Grid lines A -C/1-7):
9 A) 9 columns tube steel have an average intumescent coatin thickness of
47 mils.
8 B) 8 beams (WF) have an average intumescent coating thickness of 64 mils.
N�`I) CWI #97041661
Level II Technician BKH Inspection Services, LLC
Limitations: The test results herein were prepared based upon the specific samples provided for testing. We assume no responsibility for variation in quality (composition, appearance, performance, etc.) or any
other feature of similar subject matter provided by persons or conditions over which we have no control, this document is not a warranty or guaranty of the components inspected, it is intended to provide
information as to the components inspected